Models > 10650454901 > Instructions

10650454901 Kenmore Refrigerator - Instructions

All Instructions for the 10650454901
346 - 360 of 528
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bracket broke
Removed screws, took out the old one and put in the new one.
Parts Used:
Ice Maker Cover Bracket
  • Paul from Auburn, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker would not sense to make ice
replaced emitter and receiver
Parts Used:
CNTRL-ELEC
  • Dave from Lewisville, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
Used the instructions on your site.
Parts Used:
Icemaker Motor Kit
  • Adolph from Niceville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker not filling water
Replaced sensors but still not making ice. Followed the Brown wire from the Water fill selenoid to the Ice Maker Module. Take the three screws off the Icemaker Gearbox and there was a severely Crusty Connection. It cleaned fairly well and Presto.....ICE!!!
Parts Used:
CNTRL-ELEC
  • James from Hiawassee, GA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker was not making ice.
I installed the 2 circuit boards. Real easy. Did not fix problem so going to have to check further.
Parts Used:
CNTRL-ELEC
  • William from Seligman, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker dispenser not working
I found all my frige diagrams and was so easy to find needed parts
Parts Used:
Ice Bin Coupling Screw Washer, Plain Washer, Coupling
  • Oscar from Tucson, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not make ice
I ordered both the Ice maker and the control boards as It was for a rental and I did not want to make more trips then necessary to repair. I installed the new control boards and the ice maker and the refrigerator now makes ice.
Parts Used:
CNTRL-ELEC
  • David from Surprise, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit working
Had to Test Seloind. It Was OK. Then tested Motor Motor For Ice Maker. It Was Bad. Went Online Looked Up Parts For My Unit. They Were Shipped in a Timely Manner, only a few days. Installed parts in less than 15 minutes. Went very easy. Thank You
Parts Used:
Icemaker Motor Kit
  • David from Castalia, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Did not make ice
I simply followed the step by step instructions demonstrated in the online videos for replacing the electronic control boards - emitter and receiver. Just that simple. 15 minutes later the repairs were completed. We've had ice ever since.
Parts Used:
CNTRL-ELEC
  • Julius from Atlanta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker stopped harvesting ice
I checked the trouble shooting guide with the refrigerator and all signs pointed to the Electronic control boards that sense when the ice tray is full. After reading what other customer posted on this site I ordered the parts. I received the parts in two days time and had a harvest of ice within minutes of installing it. Thanks PartSelect. Scott
Parts Used:
CNTRL-ELEC
  • Scott from Lake George, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broke when intalling ice unit
repair was not to bad. removed 3 screws, then unplug wire harness. The next thing i did was removed clip that holds pin. slid pin back enough to put new flipper in place. needs to go in front of spring.once in place slid pin back in and put clip holder back on. Then plug wire harness back in and 3 srews . done.
Parts Used:
Flipper
  • bobbi from chehalis, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Shelf Broke
It was a no brainer just snap the piece on. The Parts select service is great have bought parts here before and prompt delivery great place to get parts
Parts Used:
Refrigerator Door Shelf
  • stephen from Northboro, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
ice maker wouldn't stop making ice
The part arrived and we replaced both of the electronic control boards. Seemed fairly simple and immediately fixed the problem.
Parts Used:
CNTRL-ELEC
  • Kathryn from Lake Dallasq, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
freezer forming ice on back panel, fridge nor freezer getting cold
Watched video of repair. Took all drawers and drawer holders out of freezer to acesss back panel. Removed 6 screws from back panel,slid up and out. Cut 2 wires to remove old bi-mtl defroster. splice the wires and attached new bi-metal def.
Parts Used:
Bi-Metal Defrost Thermostat
  • Frank from Alabaster, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker wouldn't work
Your directions were clear. When I took the control off the left side of the freezer compartment the resister burnt the plastic so badly that I had to pry cover loose. This may be a problem for others. Thanks from this "Do-it-yourselfer".
Parts Used:
CNTRL-ELEC
  • Dan from Beckley, WV
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10650454901
346 - 360 of 528