Models > 10644109300 > Instructions

10644109300 Kenmore Refrigerator - Instructions

All installation instructions for 10644109300 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 10644109300
691-705 of 723
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

plastic catches broken off ice guide

  • Customer: Wanda from Glennville GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just remove old one which was really easy since it was practically falling off and replace with new one. It is a bit tricky because you are afraid of breaking the new one. Watch the video and you will be more confident. I was REALLY impressed with the shipping. I ordered on Monday afternoon and when I returned home Tuesday afternoon it was waiting for me on my porch , and this was the week between Christmas and New Year when everyone was fussing about not receiving packages. NOT ME!

Ice shute tabs broke not allowing the guide to remain in place

  • Customer: Diane from Lawrenceville GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Repair was easy ordered correct part according to the model number new Ice guide Shute snapped into place according to the repair video guide.

Ice door sticking open

  • Customer: Peter from Sunapee NH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the really great repair video on this site. I would not have been able to do it without the video. Thanks very much for the video. Once I had the front panel off, it was relatively easy. Definitely would buy here again and attempt repairs myself. Very good experience! Very happy.

Fridge door wouldn't shut on its own

  • Customer: Catherine from Strongsville OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You

Ref door was making a popping noise

  • Customer: Melvin H. from Pearson GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
New part was not needed, when I removed lower closing cam the lower part of the closing cam attachment screw had worked it's self lose. So it just needed to be re-torqued. That took care of the problem.

Clicking sound when opening door

  • Customer: mike from richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 0 of 0 people found this instruction helpful
Watched the video provided, then followed that procedure. Everything now works fine, no more clicking.

Water dispensor leaking/Retainer clip bent

  • Customer: glen from Rancho Cucamonga CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I couldn't figure out if the front plate would come off so getting access to the screw to unscrew it was problematic at first. I don't have whatever tool you need to get at that angle so I used an Allen wrench with a 6.5 mm socket to unscrew the screw and replace the clip. After figuring that combination out it went really fast.

Refrigerator too warm, produce freezing in drawer, freezer Tito cold

  • Customer: Mona from The Sea Ranch CA
  • Difficulty: Very Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First, let me say that PS was unbelievably fast in getting the part to me ... Extraordinary, in fact. Unfortunately the new part was not the same dimension as the old one ... the four plastic arms that extend through the wall from the refrigerator side to the freezer side and secure the part in place measured a full 1/4 inch shorter than those on the original part ... Even with much effort and a few choice words, it was impossible to get the arms to clip into place ... It wasn't,t even close. So, we used our fine-toothed Swedish saw to take off 1/4 inch of the large part of the styrofoam "housing" so that the arms would extend farther into the freezer side ... Even then, it was difficult to get the arms clipped into place. If the part had been the proper dimension, it would have been a 15 minute job - just remove top two shelves from both sides and move ice maker out of the way ... Just need a nut driver to remove two screws from fridge side to get the two cover plates off and one screw from ice maker ... Push part from freezer side to fridge side, pull wire plug off old unit, plug into new unit, push unit in place on fridge side until arms click in place, replace ice maker, cover pieces in fridge, and shelves. Unfortunately, we didn't get a part that fit. Unfortunately, after all of that agony, our problem remains. We had replaced the bimetal defroster first, which also was delivered quickly. It was different from the original, but it fit and was easy to replace. Next we'll try the thermistor! Incidentally, I agree with an earlier reviewer ... Kitchenaid is junk - not the same since Whirlpool acquired it ... Same with Maytag, in my opinion. Thank goodness for Partselect.com!

PART WHERE ICE MAKER ARM FIT IN BROKE OFF

  • Customer: Yvonne from Worthington IA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
TOOK ICE MAKER OUT ALL TOGETHER WE REMOVED 4 TO 5 SCREWS HAD TO REMOVE AXEL TO GET THE BROKEN PIECE OUT AND NEW ONE IN MY HUSBAND SAID IT WAS EASY IN AND OUT IN ABOUT 15 MINUTES SAVED ABOUT 150.00 THANKS PARTSLECT

coupling broke apart

  • Customer: Rodney from Troy IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
simple remove and replace

Ice Maker quit working

  • Customer: Michael from Oroville CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the instructions on your video to replace the coupling. The blades were not installed correctly so using your Diagram I reinstalled the blades. and now it works great . and I would like to mention that the shipping was overnight. Thank you for your help saved me a whold bunch of cash and time.

ice maker stopped making ice

  • Customer: Ronald from Hebron KY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Web site is fantastic, I used web site to figure out my problem and order parts, I also used web site on how to install which made it a snap to do repair Ice maker up and running, all replacements parts were factory which fit perfectly

Ice maker not making ice.

  • Customer: Tracey from Louisville KY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Followed instructions posted on your site. It was straight forward and very simple to complete.

Ice maker sopped producing ice

  • Customer: Steven from ORLAND PARK IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Initial diagnosis incorrectly led me believe the problem was with the optic eye. After replacing the optic eve and still no ice, I realized the problem had to be with the actual ice maker itself. The removal of the old ice maker and installing of the new one took less than 5 minutes. This of course was after watching the repair video first. I still feel that I saved money by doing the repair myself instead calling in a appliance repair man, even with the added cost of the probable unneeded optic eye replacement. I am very satisfied.

Ice Maker quit working

  • Customer: Melanie from Murray KY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
The ice maker quit working about 4 years after we purchased this refrigerator. I asked several contractors if they knew what the problem could be. All believed it had something to do with the water line being stopped up. However, when I looked at the water line, it seemed fine. Thankfully when I googled about repairing this refrig, I came upon this website. It stated statistically that the Icemaker assembly part was the problem. Guess what? Replaced it and it works! The repair was a little tedious, so I got my next door neighbor to help. He has a few moments struggling getting it out and the new one in, but overall, it was not too difficult. I believe I could have done it with the video's help but certainly would have taken me longer.
All Instructions for the 10644109300
691-705 of 723