Kenmore Dishwasher Latches

Videos!

Your Price

$36.58

Kenmore Dishwasher Door Latch - Black

★★★★★

10 Reviews

PartSelect Number PS11756967

Manufacturer Part Number WPW10653840

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

RONALD from PRESCOTT, AZ

Door would not latch shut

Following a utube video made it easy. Removed the outer cover of the door to expose latch. Two screws remove the latch, pay attention to how it was positioned and put the new one on and then replace the panel. But first turn off the electricity to the unit at the fuse box. Read more...

Videos!

Your Price

$82.39

Kenmore Dishwasher Handle and Latch Assembly with Switches

★★★★★

15 Reviews

PartSelect Number PS6448153

Manufacturer Part Number A00099902

Note: This part has been updated by the manufacturer. It may appear different than the original but will still function the same.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Daniel from Burgettstown, PA

Dishwasher wouldn't turn on - Wash Light Blinking

The "Wash" light on my dishwasher began blinking continuously. I tried to reset it by turning off the power for 5 minutes. No change. I tried the "test" sequence per the dishwasher service booklet. No luck. Knowing it was either the control panel (expensive) or the door latch assembly (cheap), I first tested the door latch. With a multi-meter, I was able to determine that the door latch assembly was not functional. This gave the dishwasher a false signal that the door was always open.
To change door latch assembly:
1: Open dishwasher door and remove all the screws holding the front door faceplate on.
2: Remove the front door faceplate as well as the control panel.
3: Locate and remove the (2) torx screws holding the door latch assembly on.
4: Take note of the placement of the four electrical connectors on the old latch assembly. ( I simply removed them one by one from the old assembly and re-connected with the new one to eliminate confusion)
5. Once electrical connectors are completed, simply reverse the process.

Done! Very happy wife afterwards! Read more...

Videos!

Your Price

$44.11

Kenmore Dishwasher Door Latch - Black

★★★★★

20 Reviews

PartSelect Number PS8770043

Manufacturer Part Number W10619006

NOTE: This part has been redesigned, it may appear different but will still function the same as the original.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

Arthur from NEWNAN, GA

Inoperative door latch replaced by a redesigned latch

1. Disconnect power at the breaker, 2. remove two wood screws fastening the dishwasher to the cabinet and slide the unit out approximately 2 inches. 3. Remove old latch strike and replace with redesigned strike. 4. Slide unit in and reattached to cabinet. 5. Remove 11 screws holding inner panel of door assembly and one screw holding user interface unit to door. 6. Disconnect snap cable to latch assembly and replace the latch unit. 7. Reassemble. Read more...

Videos!

Your Price

$63.76

Kenmore Dishwasher Door Latch and Gasket

★★★★★

13 Reviews

PartSelect Number PS979852

Manufacturer Part Number 5304442175

Black in color. No longer available in almond. This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

Richard from Princeton, NC

plastic handle broke

First I removed and replaced the gasket around the tub. It didn't require any tools and took about 2 minutes to complete. I didn't really need to replace the gasket but it came with the latch kit so I went ahead and replaced it anyway. Than I removed only the top door panel (6 screws) and supported it while I removed the broken latch (2 Torx screws). I had to use a pair of needle nose pliers to pull the wires off the old latch (keeping track of where each wire came from) then plugged the wires onto the new latch and screwed it back to the door. Put the door panel back in place with the 6 screws I had removed earlier and I was done. it all took about 15 minutes and the wife is so glade she is not doing dishes by hand anymore that she left me alone for the rest of the night. Read more...

Videos!

Your Price

$67.08

Kenmore Dishwasher Door Latch and Switch Assembly

★★★★★

13 Reviews

PartSelect Number PS11754317

Manufacturer Part Number WPW10404412

Handle NOT included. This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Gerald from CASTLE ROCK, CO

Lock latch would not function properly

Removed front instrument cover. Removed latch assembly. Tried to fix it . No luck. Ordered new latch assembly. Came in from partsselect in 3 days. Installed new latch. Replaced cover. Read more...

Videos!

Your Price

$11.10

Kenmore Dishwasher Soap Cup Latch Kit

★★★★★

9 Reviews

PartSelect Number PS382922

Manufacturer Part Number 676413

This soap cup latch kit, used in a dishwasher, will keep the dispenser cover closed. If your dishwasher will not dispense detergent, there is a door latch failure, the dishes are not cleaning properly, or there is leaking, then this kit can be the solution to your symptoms. The tools required for this replacement are a #15 torx bits, a small blade screwdriver, and slip joint pliers. First locate the soap box and remove the latch on both sides. Next step is to remove the screws in the inner door panel and remove the plastic cover at the back. Remove the old latch assembly and add the new one. Make sure to unplug your dishwasher before beginning this installation project.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

Steven from Edmond, OK

Latch broke on dishwasher

Look at the exploded parts diagram, that parts select provides on their website.

You have to take off the nine star pointed screws. So you need a special screwdriver or I had a socket set of them and I used a ratchet to make it easier. I think there are nine of them around the base of the door. Then remove the door and set it on the counter. Flip it over and there is a small plastic cover that has to be removed from the back of it, and it is easily removed by gently pulling on it.

Now comes the difficult part. There is a locking piece on it that holds the latch onto the door by interlocking with a piece on the back side of the door. I took a pair of wire snips and just cut the old interlocking piece off. This way I didn't have to try and slide the two interlocking pieces apart.

When you go to put the new piece on before you interlock them make sure they are put on right. Specifically the latch is pointing the right way to seal the detergent door. Otherwise it can be a pain to separate the interlocking pieces again. (which is why I cut it off the old one).

Then you're done. Just put it all back together. Read more...

Your Price

$78.78

Kenmore Dishwasher Door Handle and Latch Assembly - Black

★★★★★

4 Reviews

PartSelect Number PS6448156

Manufacturer Part Number A00104102

This door latch assembly comes with the bisque handle attached.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Patrick from Zachary, LA

No one could open the door, but me.

I took out the four screws that hold the front plate on and removed the latch/switch combo. Two screws hold that on, so i removed them and disconnected tthe wires. Put new assembly in place, reconnected the wires and put it all back together. Case, and door, closed. By the way, getting my part from PartSelect was very easy. Read more...

Videos!

Your Price

$42.54

Kenmore Dishwasher Door Strike

★★★★★

5 Reviews

PartSelect Number PS2331186

Manufacturer Part Number 154662601

This door strike is mounted to the top of the dishwasher cabinet. This part catches the door handle to keep it closed.

Fixes these symptoms

Door latch failure
Door won’t close
Will Not Start
See more...

Installation Instructions

Shuaib from Hollywood, FL

My door would not close, so I could not turn on the dishwasher.

It was simple, I do have extended warranty from AHS, but they charge me a trip charge of $55 per repair, and then all parts and labor is covered. But when I checked with Parts Select the parts costed me about $10, so I decided to do it myself.

While I was at it, I also bought other parts and updated my dishwasher with some upgrades.

Good place to buy any parts from, they are very helpful, if you do not know your parts. They even had drawings of my dishwasher, and this actually helped me find what kind of other parts I could buy to upgrade my dishwasher.

Parts select is on my favorites list and pass it on to all my friends. Read more...

Videos!