Washer stopped spinning as well as drawning the water out.

First removed the cover off the control knob on the front of the control panel. Then removed the clip holding the control to the timer. Watch for the spring that is under the control knob as you pull it off. Then remove control ring set them aside. Next unscrew the two screws holding the timer to the control panel. Next unscrew the screws holding the control panel. Removed control panel. Next unfasten the wire harness from the timer. Remove timer and install new timer. Replace wire harness to new timer. Screw new timer to control panel. Replace control panel and screw into place. Replace control ring then timer knob with spring. Replace cover on control knob. Simple, Easy and Fast.