Timer was no longer counting down to finish

ApplianceHotpoint Dryer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Tom From Lawrenceville, GA

Aug 02, 2007

4 out of 7 people found this instruction helpful

Removed the screws holding the Top of the Dryer control panel. Pulled the top off, The section with the controls hinged down for easy access.
Used needle nose pliers to pull off the wiring harness. The timer module has grooves that all you need to do is turnit a quarter turn and it pops right out, no screws or funny clips, real easy.
The new Timer goes in just as easy, line up the tabs with the slot and quater turn locks it in. Repalce wiring harnes on same pins as removed, screw the top back in place and good to go!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer

Part Number: PS268298

$114.27
In Stock