When tub was turning it had a grinding sound.

ApplianceHotpoint Dryer

ModelSorry,Idon'trememberthemodel

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Chuck From Cowiche, WA

Apr 09, 2008

3 out of 6 people found this instruction helpful

First unplug the dryer from power. Now open the dryer door and remove the two phillips head screws that hold the top down. Then lift the top off and turn the dryer on it's back (this is not necessary but if you have the room it makes the job easier). Now remove the two hex head screws that hold the front on and remove the wires from the door switch. Now you can lift the front of the dryer off, door and all. This now allows you to replace the three (on this model) slide bearings and the felt. I also removed the belt and lifted the drum out and checked both the belt and the rear bearing. You can do it!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Slide Bearing

Part Number: PS267877

$5.73
In Stock

Air Duct Felt Seal

Part Number: PS268331

$13.68
In Stock