Water leakage during filling

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers
Socket set

Ralph From Milwaukee, WI

Nov 11, 2013

Removed front panel, raised top, started washer and observed location of leakage in vicinity of injector valve/nozzle. Disconnected hoses (2 places} to remove existing injector valve and nozzle. Had to grind thru one of the hose clamp "rings" which had no screw to tighten/loosen it to remove it. Installed new injector valve and nozzle and reattached hoses using an existing hose clamp and one new hose clamp to replace original "ring" clamp. Refastened washer top using socket set and refastened front panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Plastic Injector Nozzle

Part Number: PS2018687

In Stock

Rubber Injector Valve

Part Number: PS2019175

In Stock