The ignitor would lite, but no gas from the valve, then ignitor would shut off

ApplianceMaytag Dryer

ModelLDG4000

Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Wrench(Adjustable)

Lee From Madisonville, KY

Mar 12, 2013

It was a fairly simple repair to perform with the dryer in place. I simply opened the bottom/front access panel to start, the door removes if you pull up after opening. Then I disconnected the two and three wire connector to the two coils. Next I removed the bracket screws that fasten the coils to the valve assembly. This was a little difficult with the screw closest, because of the small clearance and #1 sized phillips(stubby would work well.) The rear screw I managed to remove by using both a small flathead screwdriver(hex shaped shaft) and an adjustable cresent wrench. At this point, it was a simple matter of installing the new coils and the bracket, and then reconnecting the two plugs. It almost made me want to do laundry.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

'M' Series New Style Coil Kit

Part Number: PS334310

$13.95
In Stock