surface burners were not heating heating to the fullest when cooking on the four burners.

ApplianceGeneral Electric Oven


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Louis From New Haven, CT

Mar 03, 2013

I turned the power off, then I removed the two screws under the top panel that have all the knobs.Then I removed two screws behind the panel,and pulled the panel twards me. By doing this the clock control is exposed.I removed the four screws that held the clock control and peeled the face plate and installed it on the new unit. I then secured the new unit to the panel with the four screws. I switched the wireing to the new control.I reinstalled the front panel two screws in the rear and two screws under the panel. Then I replaced all the knobs.This took me about half an hour. I had a good time doing it my self.I also changed the lower burner. Removed two screws,pulled the burner back and removed two wires and replaced them on to the new unit and replaced the two screws. L'm happy & so is my wife.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Control To 8

Part Number: PS238549

In Stock