Water was leaking when the washer was filling

ApplianceMaytag Washer

ModelA211

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Charles From Milton, PA

Jan 13, 2013

out of people found this instruction helpful

All I had to do was take the front of the washer off by unscrewing two screws at the bottom front panel using a screw driver, then loosen the top by taking two hexnut screws out from under the top (in front top corners of the washer. Next, I lifted the top of the washer up (which is on hinges, disconnected one hose clap at the top rear laft corner of the washer and pulled out the rubber injector valve which has the plastic injector nozzle inside of it. I inserted the new plastic onzzle in the new rubber valve, placed it back in the hose, tightened the hose clamp and replaced the screws in the top of the washer and put the front panel back in place and screwed in the bottom. It could not have been simpler and saved me at least $60-$80 dollars in repair costs.(I know because I paid to have this replaced once before, but never again.)

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Plastic Injector Nozzle

Part Number: PS2018687

$4.06
In Stock

Rubber Injector Valve

Part Number: PS2019175

$9.60
In Stock