The end of the auger blade was broken off where it dumped ice into the door dispenser.

ApplianceGeneral Electric Ice Maker

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers
Wrench(Adjustable)

Jeff From Boonsboro, MD

Jul 23, 2007

3 out of 5 people found this instruction helpful

I remove the drawer and waited for it to come up to room temp. One screw was removed from the top front sheild so it could be removed. The housing for the front of the auger also contains the ice crusher. This unit snaps into place after removing two screws from the bottom. Caution was used during removeal so the shaft for the ice crusher engage was out of the way. Once completely unsnapped the front of the auger is exposed. A lock nut with reverse threads is removed and the ice crusher blades and spacers are removed. Remember the position of the blades and spacers for reassembly. Reverse the order for reassembly. Caution when snapping the front assembly back in place to ensure the ice crusher engagement shaft is seated properly. Easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Bucket Auger

Part Number: PS964350

$29.00
In Stock