Freezer not cold, Frig cold enough, runs all the time, Hot to touch in spots.

ApplianceGeneral Electric Refrigerator

ModelGSS20IETABB

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Pliers
Screw drivers

Kevin From York, PA

May 10, 2012

My compressor fan that blows over the coils was not spinning. I measured 120 VAC going to the fan so I knew it should have been spinning but wasn't. Took fan motor out and took it apart and super lubed the motor to get it spinning again temporarily until I could get the new one in. Put new one in and has been working for about 10 days now. Freezer is not below 0 deg F which is what you want. Frig is below 40 deg F also what you want.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Condenser Fans Blade Assembly

Part Number: PS1022410

$4.21
In Stock

Condenser Fan Motor

Part Number: PS1766247

$22.49
In Stock