Washer was leaking water at hose to tub connection

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Rich From Wheaton, IL

Jul 20, 2011

0 out of 1 people found this instruction helpful

Replaced the hose and new clamps. Rans washer through complete cycle. Found that during the spin cycle the tub seemed un-balanced and was making a metallic ticking sound.
Found that the thre struts which attach to the tub were loose-- especially the front nut. Found two halves of lead washer laying on bottom of washer cabinet. The washer had fallen out from behind the front strut and nut. Placed the washer back between the strut and tub and tightened the nut and the metallic sound was gone as well as most of the tub swaying during the spin cycle. Tightened all three strut's nuts. Ran washer through and additional cycle and washer was back to normal. The loose nuts seem to have caused excessive tub sway which in turn put extra stress on the tub hose connection to cause the original leak. Machine is 25 years old and still washing well!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Outer Tub to Pump Hose

Part Number: PS2018693

In Stock