Water pump leaking at value stem.

ApplianceGeneral Electric Dishwasher

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Nutdriver
Screw drivers
Socket set

Tom From Washington, MI

Jan 13, 2011

10 out of 21 people found this instruction helpful

Removed built-in washer and turned on side. Removed complete motor and pump to work on bench (easier). Removed pump and replaced with new unit. Instructions did not tell what to do with white plastic tube for shaft(goes with lip facing motor onto shaft)Be sure rubber seal is pressed into pump fully. Inch pound instructions were not helpful. Remember how much pressure it took to take off it helps to install new pump. Inch pounds is not what most people know or use. Reassemble unit, flipped on end and tested for leaks before replacing under cabinet.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Single Drain Pump Housing

Part Number: PS259587

$23.71
In Stock

Impeller and Seal Kit

Part Number: PS259598

$16.96
In Stock