Snap tabs for wheels on original part broken - resulting in the top rack being loose on one side and falling down when you touched it.

ApplianceMaytag Dishwasher

ModelMDB9100AWB

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools

Ann From Grand Rapids, MI

Apr 01, 2010

2 out of 2 people found this instruction helpful

I aligned the V-shaped tabs on the inner side of the part with the slots in the mating part and simply pulled the old part out (it was already disengaged from the wheels in the metal rail). I then inserted the new part into the slots. One side went in well, but the other side required the part to be bowed slightly to match up the V-shaped tab with the slot. Then the hard part was getting the wheels in position to snap them on. Once in position, it took a bit of effort to engage the snaps in each wheel. I was afraid of breaking the new part. These snaps are very stiff and even with the notch between them there isn't any give, but I was able to apply enough constant, steady pressure to finally get them to snap in without breaking.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Wheel Mounting Strip Only - NO Wheels

Part Number: PS2099474

$19.89
In Stock