Turntable stopped working

ApplianceGeneral Electric Microwave

ModelJVM1860SF001

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Joe From Greensboro, NC

Feb 10, 2010

1 out of 2 people found this instruction helpful

First I unpluged the power cord. Then I removed five screws on the bottom panel which will swing down to reveal the turntable motor. I removed the electrical plug from the motor and the two screws that hold the motor in place. Put the new motor in place and align the flat side of the motor shaft with the hole in the bottom of the turntable. Fasten the two screws that hold the motor back in place and reconnect the power plug to the motor. Swing the bottom panel back in place and secure with the five screws. Plug the power cord back in and reset the clock and you are ready to use the microwave.

This was a very simple do-it-yourself repair and information on the partselect website was very helpful. The order and shipping process was simple and fast. Anyone who knows which end of a screwdriver to use should be able to do this repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Motor

Part Number: PS237772

$39.45
In Stock