leaking water under back left of washer

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers

Gregory From Louisville, KY

Jan 26, 2010

1 out of 4 people found this instruction helpful

The first thing I did was look at the diagrams for my specific appliance on the parts select web site to locate fastners. I removed the front panel(2 screws 4" from floor on front panel), then removed the corner bolts of top panel(found under in front). Next I removed the 4 screws on the control panel (on top). I located the screw holdling the fill injector to the top Lid. Then I removed the clamp holding the unit to the regulator. Assembled the unit and placed it in position. First attaching the fill injector to top panel, then clamping the hose to regulator, then replacing 4 screws in control panel. Next the two corner screws in corners under the top panel. Replaced front panel and 2 screws. Then had a trail run and no water leaks any where.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Clamp

Part Number: PS378116

$3.82
In Stock

Hose Clamp

Part Number: PS380193

$2.70
In Stock

Lower Fill Injector

Part Number: PS2019426

$22.18
In Stock

Upper Fill Injector

Part Number: PS2019427

$22.36
In Stock

Injector Hose

Part Number: PS2019430

$36.20
In Stock