Washer was leaking where the tranmission entered the tub

ApplianceGeneral Electric Washer

ModelWSQ4160T2WW

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Wrench set
Pliers
Nutdriver
Screw drivers
Socket set
Wrench(Adjustable)

Kevin From Dillon, CO

Nov 10, 2009

16 out of 19 people found this instruction helpful

Based on other research, the location of the leak indicated that the main tub seal needed to be replaced. I took the washer apart before ordering new parts in case I broke other parts in the process and to be sure I could. I ended up having to cut off the Agitator Coupling and really marred up the hub nut. Those were the hardest 2 pieces to remove since they had corroded badly after many years of use. I had to use a pipe wrench and a hammer to remove the hub nut and a hack saw to get the agitator coupling off (air bell).
$68.00 and 2 hours later, the washer no longer leaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tub Dampening Strap

Part Number: PS271100

$3.71
In Stock

Hub Nut

Part Number: PS271505

$7.45
In Stock

Hub Washer

Part Number: PS271511

$3.14
In Stock

Agitator Coupling Kit

Part Number: PS1517844

$5.93
In Stock

Split Ring

Part Number: PS1766022

$3.75
In Stock

Tub Seal (Now subbed to SEAL TUB)

Part Number: PS4704237

$7.23
In Stock