I pulled washer from the wall too far and broke the Syphon break

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers

Jeff From Lexington, NC

Jul 14, 2009

0 out of 2 people found this instruction helpful

I removed one screw from the access panel directly below the syphon break. I removed the 4 screws that secure the elbow to the valve. I reached inside the access panel and pulled the valve towards the front of the washer far enough so I could reach in and remove the broken elbow. I inserted the new elbow and replaced all the screws. I connected the drain hose to the syphon break, connected both water lines and I was done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Syphon Break Elbow Kit with Clamp

Part Number: PS2017573

$14.39
In Stock