Icemaker quit making ice

ApplianceKitchenAid Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

Michael From Charlotte, NC

May 13, 2009

0 out of 2 people found this instruction helpful

The first step is to turn the icemaker switch (located inside the freezer) off. Then, I removed a single nut to the right rear of the icemaker unit and loosened the clips that hold the unit in position (one clip on each side).

Next, I disconnected the wires (you have to hold the clip open to pull them apart).

Once the unit was out, I removed the old motor module by removing the three screws that hold it in place. I installed the new motor module, and then reconnected the wires and put the unit back in the freezer. One nut to hold the unit in place, and turn the icemaker switch back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Icemaker Control Assembly

Part Number: PS2341896

In Stock