Dishwasher leaking at rubber connector - pump wash arm

ApplianceGeneral Electric Dishwasher

Model

Level of DifficultyReally easy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Wrench set
Screw drivers

Skott From Mason, OH

Apr 15, 2009

71 out of 133 people found this instruction helpful

First removed dishwaser from under counter so I could get to rubber connecter. It is located in center under dishwasher. I first needed to unscrew with wrench rubber connection at pump and and then the complete piece unscewed by hand from pump wash arm. I then just had to screw new rubber connector back on to bottom of dishwasher and re-attached at the pump. It was very easy to replace the rubber connector. I also replaced the dishwasher sump housing because it was made of same rubbber material and feared it was deteriorating also. I had to unscrew with wrench at pump as well and it just popped out from inside dishwasher after unscrewing screen inside dishwaser. Popped new piece in and screwed screen back on and reconnected underneath dishwasher back to pump. The rack roller wheel just popped right on. FYI: The wheel is actually 1.75 inches in diameter not 2 inches. I was worried it might be too big if it where 2 inches but it was the same size as the other wheels which was 1.75 inches. The hardest part of this job was getting the dishwasher in and out from under the counter. The good news is that most of these parts are standard and the replacement parts fit perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lower Front Dishrack Wheel

Part Number: PS259136

$8.77
In Stock

Sump Housing

Part Number: PS259557

$19.25
In Stock

Pump To Wash Arm Rubber Connector

Part Number: PS259558

$9.07
In Stock