Oven would not heat

ApplianceJenn-Air Range

ModelS125

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Rose From Modesto, CA

Feb 14, 2009

2 out of 2 people found this instruction helpful

First I removed the two screws that held the old element in place. Then I pulled the element out about 5 inches so I could reach and pull off the wire clips from the old element. I then attached the wire clips onto the new element and pushed back the wires into the insulated area and when the back plate matched up to the screw holes, I re-inserted the screws and tighten them down. The oven works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element (16" long x 19" wide) (Now subbed to Bake Element - 240V)

Part Number: PS2195202

$30.84
In Stock