Washing machine Repair Guide-My washer won't spin or agitate in either the delicate or the regular cycle.

My washer won't spin or agitate in either the delicate or the regular cycle:

If your washing machine isn't spinning or agitating in either the delicate or the regular cycle, investigate each of these areas as a possible cause to the problem:

Selector Switch

Make sure that the selector switch on the control panel, if there is one, is set properly. Check to ensure the button has been pressed all the way in. If it is, then try testing the switch. If it has failed, it will need to be replaced.

How to test a washer's selector switch.
How to replace a washer's selector switch.

Find a selector switch for your washing machine.

Clutch Assembly

Not all washing machines use a clutch assembly. Given that it is such a complicated component, you should have a qualified appliance repair technician examine and repair it for you.

Find a clutch for your washing machine.

Drive Motor

Many different brands of washing machines contain a two-direction drive motor. These two-direction drive motors turn in one direction for one wash cycle, and in another direction for a different cycle. Though it is uncommon, it is possible for the drive motor to work fine in one direction, while remaining completely inoperable in the other direction. Even if your washer's drive motor works fine in one direction, you will have to replace the entire motor.

How to test a washer's motor.
How to replace a washer's motor.

Find a motor for your clothes washer.

FREE appliance repair advice from the pros!

GE making grinding sound @ startup
Sun, 07 Sep 2008 01:57:06 GMT
Post By: phiftybuick
Hello everyone- I have a built-in GE D/W that makes a loud grinding noise, but only when you start it up. I'm guessing it's the pump drive or something. I haven't had time to take it apart yet, so I...

Necklace caught
Sun, 07 Sep 2008 01:51:55 GMT
Post By: silly girl
I left a necklace in a pocket when I did laundry.:eek: The chain has fallen down through the inner drum drain holes where it has apparently knotted up. It is prevented from falling through by the...

Oven temp won't work correctly
Sun, 07 Sep 2008 01:32:49 GMT
Post By: BIGHETER
Oven just started not heating up much until you turn the thermostat higher that what you want and then clicks off when you know its not right. It appears to be the thermostat in the back of the oven...

GE Oven 9 years old.It beeps and shows F7 me
Sun, 07 Sep 2008 00:15:39 GMT
Post By: Fitzakarle
GE Oven ca. 9years old;it beeps & indicates F 7 .After disconnecting for 1 Minute , and reconnecting ,it starts all over .What gives .Is there a chance to fix it ?

Tappan Oven Ignitor Lights No Gas Flow
Sat, 06 Sep 2008 22:25:40 GMT
Post By: dewayne harold
Hello The Oven Ignitor Lights Bright But The Gas Flow Is Not Coming On. The Gas Line Is Connected And On. Before This The Oven Temperature Was Cycling. Is This The Thermostat Located At The Button...

See all our repair forums