Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tommy
January 3, 2018
Compressor running but not cooling? Added the 134a refrigerant. But still not cooling.
For model number KSCS23INSS01
Hi Tommy, Thank you for the question. I suggest testing the Bi-Metal Defrost Thermostat.The best way to do this is to remove the Thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. Hope this helps
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
May 28, 2019
A appliance repair guy came to look at my fridge, he said the compressor is bad and needs to be replaced and everything will work again. It’s a KitchenAid fridge model number above. Will this part work with my fridge and does it come with or without the electrical components?
For model number kbrc36fts03
Hello Mike, thank you for inquiring. Yes, this is the correct replacement for your model. It comes with everything needed to install it.
2 people found this helpful.
Was this helpful?
Thank you for voting!
STANLEY
June 17, 2021
TECHNICIAN TELLS ME THE COMPRESSOR NEEDS REPLACING. SHOULD I BE ABLE TO REPLACE IT MYSELF? HOW LONG SHOUDL IT TAKE? CAN I SIMPLY PURCHASE THE COMPRESSOR AND INSTALL WITHOUT THE COMPRESSOR NEEDING ANYTHING - SUCH AS A 'CHARGE' OR SOMETHING ELSS
For model number WRX988SIBM03
Hello Stanley, Thank you for the question. The Compressor would need to be charged and installed by a licensed repair man. We hope this helps!
Was this helpful?
Thank you for voting!
Kelvin
September 13, 2022
What are in the W10841139 kit? It showed compressor, filter dryer, inverter board and others or only compressor? Please confirm for me. Thanks
Hello Kelvin, Thank you for the question. The Kit includes the Compressor, Filter Dryer, Inverter Board and the Mounting Hardware. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
