Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS963897
For freezer baskets.
This part works with the following brands: GE, Hotpoint & Kenmore.
Handle just snaps on.
Help other customers find the most helpful instructions.
Were these instructions helpful?
With an allen wrench, I removed the remaining and broken drawer slide brack assembly on the bottom of the refridgerators right side. I then installed the new right-handed drawer slide bracket assembly in a similar fashion. The freezer handle easily snapped into place. The entire process was completed within ten (10) minutes.
Just snapped the part in place. No tools needed
Really easy to install - they both snapped into place.
First, I removed the four screws holding the auger motor and solenoid in place. After testing the solenoid as good I replaced it and did more research. I was having several symptoms so was unsure which part or parts were bad. I spent $50 on a service call and got the diagnosis of a bad main board. I ordered the part and got it two days later. After removing the several screws from the rear panel it was so easy to remove and replace the board. Plugged it back in and it worked perfectly.
simply snap it on to the drawer. Very easy
Removed the cover plate. Noted which wires went were. Removed the wire leads and placed them on the new board. Replaced the board into the socket and restored power.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.