1155316-1-S-GE-WR49X10144        -Slide Bracket Kit -  Left and Right Side
1155316-1-S-GE-WR49X10144        -Slide Bracket Kit -  Left and Right Side 1155316-2-S-GE-WR49X10144        -Slide Bracket Kit -  Left and Right Side

Slide Bracket Kit - Left and Right Side

PartSelect Number PS1155316

These are the slide brackets for the bottom drawer.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $140.70
  • You Save

    $23.45
  • Your Price

    $117.25
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Screw - 8/18 AB HW 1/2 S

Part Number 1483105

$2.56
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

12 of 13 people found this instruction helpful

Parts Used

  • Slide Bracket Kit - Left and Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRichard from Jacksonville FL

Wife was cleaning regrigerator, pulled bracket out, bracket seperated in her hand, ball bearings all over the floor

Removed old bracket (2 screws), ordered new bracket and installed. Discovered that the bracket had been redesigned due to numerous failures as described above.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Slide Bracket Kit - Left and Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDAVID from SWANSEA IL

Broken drawer slide

The part was pretty expensive but was very simple to fix. This company did a good job. Again, kind of expensive (>$100 for a pair of drawer slides) but simple to fix.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set

CustomerTodd from Huntersville NC

Broken drawer and freezer front/handle

With an allen wrench, I removed the remaining and broken drawer slide brack assembly on the bottom of the refridgerators right side. I then installed the new right-handed drawer slide bracket assembly in a similar fashion. The freezer handle easily snapped into place. The entire process was completed within ten (10) minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDouglas from Hauppauge NY

Slide bracket broken

Repair is as simple as removing and replacing two screws that hold the bracket and spacer to the refrigerator wall. The only catch is that the screw is not a phillips head but a star. Luckily I had a multi-tip screwdriver set.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4