Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Garry
January 26, 2024
Top element stays on inside stove. Temperature is set at 375f, non convection. burns top of food, replaced temperature probe with OEM GE part, Issue is still present. Temperature rises way above set limit of 375. Do I need to replace a relay? if yes, part number?
thanks
For model number PCS968DR3WW
Hi Garry, thank you for getting in touch. Based on the description, the issue is probably with the oven relay, part number PS953104. It helps regulate the oven temperature. You may need to replace the relay to fix the issue. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
October 11, 2021
ALL burners are not working on this glasstop GE model. Checked range voltage input. Could it be this relay? How to confirm?
For model number PCS968SR1SS
Hello Jean, Thank you for the question. If all the elements are out on the cooktop, it is normally an indication there is a wiring issues. The relay would only effect the Oven. We suggest checking the wiring to the Elements. We hope this helps!
Was this helpful?
Thank you for voting!
Scott
August 1, 2023
I have no power to convection fan motor when in convection bake mode. Would this cause this ?
For model number CS980SN1SS
Hi Scott, thank you for reaching out. Based on our research, first you need to make sure there is no issue with the wiring and it is properly in place. If that is not causing the issue, then you may need to check the electronic control board, part number PS8754526, as it is most likely faulty. We hope this helps!
