This thermostat that regulates the temperature of the fresh food section.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Fridge too cold
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 240383703 replaces these:
AP2116225, 949033
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
March 13, 2018
The fridge side is freezing food like a gallon of milk will this part fix that problem?
For model number FRS26BH6CS0
Hi Frank,
Thank you for your question. It could be this part. You may also want to check your defrost thermostat and your evaporator fan motor. If all three of these parts are working fine on your appliance you might have to look at your adaptive defrost control board. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
April 5, 2018
The fresh food section is running at 50 degrees after the baffle control was replaced. I have been told this is the part i need. Please advise i need a second opinion.
For model number FRS26KF7AQ5
Hi Mark,
Thank you for your question. if the refrigerator section is too warm, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the evaporator fan motor, the defrost thermostat, the run capacitor, the adaptive defrost control board, the condenser fan motor and the start device. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jon
September 16, 2017
It looks like i have to remove the damper assembly to install the temperature sensor for the thermostat (240383703). How do i do this? Do i also have to remove the damper motor to get this done? I'm referring to the sensor that wraps around the vent opening. Thanks!
For model number FRS26KR4CQ0
Hello Jon, thank you for contacting us. We have a how to video that shows how to remove the damper assembly. You can follow the link below, hope this helps!
https://www.youtube.com/watch?v=D8awNkwAnGA
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.