394678-2-S-Whirlpool-8300802           -Thermostat
394678-2-S-Whirlpool-8300802           -Thermostat 394678-1-S-Whirlpool-8300802           -Thermostat 394678-3-S-Whirlpool-8300802           -Thermostat

Thermostat

PartSelect Number PS394678

Replace this part if the oven stops working and the door locks while using the self-clean option on some appliances.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open after self cleaning cycle.
  • Will Not Start.
  • Compare At

    $55.93
  • You Save

    $9.32
  • Your Price

    $46.61
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 6 reviews What's this?
1-6 of 6
 

61 of 65 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAbdurehman from Lawrenceville GA

When using self cleaning, oven door wouldn't open and screen panel went blank.

I searched similar problems on the web and learned that a whole lot of people have Kitchenaid stove with the same problem. They all stated that the thermostat burns when self cleaning. Since technician wanted $190.00, I decided to change it myself. The part cost me $40.00. To instal the thermostat, I removed the panel at the back of the stove and the thermostat is attached with two wires. After I replaced the thrmostat, the screen panel came on and I was able to open the door. I am posting this to tell people that anyone can do this.

Help other customers find the most helpful instructions.

Were these instructions helpful?

23 of 24 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRandy from Bellevue WA

During the cleaning cycle, oven died and door locked

Apparently this is a common problem (defect) with KitchenAid ovens of various models. I am not a repairman, but replacing the thermostat was very simple. I pulled the stove out and removed the large back panel of the oven. The was right there in the open, impossible to miss. It looked identical the the replacement thermostat. There are only 2 screws and 2 wires to push on and it's fixed. Anybody can replace this part easy. I hope the replacement part is better than the original!

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 15 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAndy from Beaverton OR

Kitchenaid stove dies after cleaning

I have a Kitchenaid stove that completely shuts off in the middle of the self clean cycle. I did some research on the internet and discovered that it was the thermostat (aka thermal fuse). It was a real easy repair. All you have to do is take off the back panel. You will see the thermostat in the upper left of the machine (there are two wires connected to the part). The part is fairly expensive around $45. No one in town had the part so I had to order from Partselect.com (which was very easy to find). The repair was simple, all you need to do is connect the new thermostat in place of the old one. Dont forget to unplug the stove before you get started. After replacing the part the stove worked just fine. From what I can tell from the research this is a common problem and there is no permanent fix. We are resigned to not using the self clean mode on the stove which is a drag, but it is cheaper than buying a new stove.

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 16 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKaren from Clintondale NY

Self-clean feature caused control panel to die and oven to stop working. Oven door remained locked.

This is a known defect with KitchenAid ovens. If your range is out of warranty, KitchenAid will do nothing to help. (They should really issue a recall). I figured out through research that the part is the thermostat fuse, so instead of paying a repair company to come to the house, diagnose the problem and do the repair, I ordered the part on PartSelect.com. I probably saved myself $200. My husband did the repair and said it was really easy. It took him 10 - 15 minutes. He took a picture of the back of the oven with the back panel off, showing where the part is located, but looks like I'm not able upload images. All you need is to be able to pull your range out to get to the back of it and a screwdriver to remove some screws and replace the thermostat. Once the part was replaced, the control panel came back on, the oven unlocked and is now working again!! I will not use Self-Clean again - that is for sure!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 14 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJames from Cloverdale CA

Gas range oven door stuck shut during self-clean

The thermostat blew during the oven self-cleaning cycle (apparently it's a common problem). Take off a few panels in the back of the range with a screw driver. Pull the terminals off the existing thermostat and (safely) touch them to make sure it's not some other problem. If the oven comes back to life order this part. Unscrew the blown thermostat and attach the new, plug the terminals and re-attach the back panels.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 9 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customersteve from scituate MA

During self clean oven shut down and door would not unlock.

after reading tips on your site I just removed 1/2 dozen or so screws
took off back cover, part was right in the open, 2 more screws unplugged/replugged part, it worked! couldn't have been easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6