Models > GW395LEPS00

GW395LEPS00 Whirlpool Range - Overview

Get Parts and Repair Help for GW395LEPS00

If you know the range repair part you need, you can browse the list of all parts on the GW395LEPS00, or you can search by name or part description. You can also find your part by where it is located on the GW395LEPS00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Screw

This screw is sold individually.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$36.04

Oven Rack

Sold individually.

$18.76

Light Bulb - 120-130V - 15W

Sold individually.

$4.11

SCREW

$63.84

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$3.86

Touch-Up Paint - White

$2.70

Screw

This screw is sold individually.

$56.33

Thermostat

Replace this part if the oven stops working and the door locks while using the self-clean option on some appliances.

$33.12

Small Burner Cap

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

When using self cleaning, oven door wouldn't open and screen panel went blank.

  • Customer: Abdurehman from Lawrenceville GA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 44 of 47 people found this instruction helpful
I searched similar problems on the web and learned that a whole lot of people have Kitchenaid stove with the same problem. They all stated that the thermostat burns when self cleaning. Since technician wanted $190.00, I decided to change it myself. The part cost me $40.00. To instal the thermostat, I removed the panel at the back of the stove and the th... read more

During the cleaning cycle, oven died and door locked

  • Customer: Randy from Bellevue WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 19 of 20 people found this instruction helpful
Apparently this is a common problem (defect) with KitchenAid ovens of various models. I am not a repairman, but replacing the thermostat was very simple. I pulled the stove out and removed the large back panel of the oven. The was right there in the open, impossible to miss. It looked identical the the replacement thermostat. There are only 2 screws and... read more

Kitchenaid Stove Dies After Cleaning

  • Customer: Andy from Beaverton OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 11 people found this instruction helpful
I have a Kitchenaid stove that completely shuts off in the middle of the self clean cycle. I did some research on the internet and discovered that it was the thermostat (aka thermal fuse). It was a real easy repair. All you have to do is take off the back panel. You will see the thermostat in the upper left of the machine (there are two wires connected t... read more