BBB A-Plus
349692-1-M-Whirlpool-387838-Agitator-Assembly.jpg
349692-1-S-Whirlpool-387838-Agitator-Assembly.jpg 349692-2-S-Whirlpool-387838-Agitator-Assembly.jpg 349692-3-S-Whirlpool-387838-Agitator-Assembly.jpg

Agitator Assembly

PartSelect Number PS349692

This assembly includes the base, agitator and filter. The agitator base is no longer sold separately. This assembly does NOT include the fabric softener dispenser, agitator screw or the cap. Must order those separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

In Stock

  • Compare At

    $73.54

  • You Save

    $12.26

  • Your Price

    $61.28
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts

Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lint Filter and Upper Agitator

Part Number 381219

This part serves two functions for your washing machine: lint filter and upper agitator.
$59.36
  In Stock

Fabric Softener Dispenser

Part Number 381197

Use this dispenser for your direct drive washing machine.
$10.77
  In Stock

Agitator Cap

Part Number 341520

$4.21
  In Stock

Agitator Bolt

Part Number 348478

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
$4.46
  In Stock

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-1 of 1

 

6 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerROBERT from LOMBARD IL

Upper agitator kept flying off during spin cycle

i replaced the 2 parts listed above.
very easily by using a 7/16 wrench to unloosen
the bolt that holds the agitator base on. pulled it off
(you have to pull a little hard) to unseat the base from the assy. looks like a tapered fit. then push the new one on. (make sure it bottoms out) then install & tighten the bolt. & then slide on the upper agitator

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-1 of 1