327641-1-S-Whirlpool-2182179           -Lower Door Closing Cam
327641-1-S-Whirlpool-2182179           -Lower Door Closing Cam 327641-2-S-Whirlpool-2182179           -Lower Door Closing Cam 327641-3-S-Whirlpool-2182179           -Lower Door Closing Cam

Lower Door Closing Cam

PartSelect Number PS327641

This door closing cam is located on the bottom of the fridge/freezer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Clicking sound.
  • Fridge section too warm.
  • Door sweats inside or outside.
  • Unusual Noise.
  • Compare At

    $4.51
  • You Save

    $.75
  • Your Price

    $3.76
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Cam

Part Number 4082687

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

$3.83
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 35 reviews What's this?
31-35 of 35
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerjim from catawissa PA

Door would not close on it"s own

pulled top hinge pin off with 5/16 nut driver ,lifted door off and was able to see both parts and replaced them just like they were,easy fix

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerAdam J from Annapolis MD

Fridge door wouldn't stay closed

Removed the door with Socket set & removed the lower door closing cam, replaced it with the new one and reattached the door. Biggest part of the problem was diagnosing the part needed. I replaced the filter while I was at it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customermichael from Westchester IL

Dor would not close by it,s self

supported door with blocking and removed lower
arm and cam. Replace cam and re installed arm.
removed blocking from door and tested completed installtion of cam. all went well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Socket set

CustomerDavid W from yoakum TX

Door would not close

i blocked up door took brakets off replaced plastic cams put back together door works like new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRick from Johnston IA

Door would not close on its own...had to give it a little extra shove

Took off the top cap, undid the 3 screws holding the top door bracket on, took off the door, repshove the lower door closing cam pieces, and then put the door back on...piece of cake, dude.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-35 of 35