327358-1-S-Whirlpool-2180224           -Ice Guide
327358-1-S-Whirlpool-2180224           -Ice Guide 327358-2-S-Whirlpool-2180224           -Ice Guide 327358-3-S-Whirlpool-2180224           -Ice Guide http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/6GWTW553.gif

Ice Guide

PartSelect Number PS327358

This ice guide is located in the freezer door.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.
  • Ice maker dispenses too much ice.
  • Leaking.
  • Door Sweating.
  • Compare At

    $9.32
  • You Save

    $1.55
  • Your Price

    $7.77
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 38 reviews What's this?
1-5 of 38
 

118 of 131 people found this instruction helpful

Parts Used

  • Ice Guide

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerTracy from Jacksonville, FL

External ice guide broke a tooth and fell off

We waited two years to do this because we didn't want to hassle with a repair man to come out and charge us arm+leg for something so simple. Finally we searched and found the part on line. It came two days FASTER than promised. Kudos to Part Select.
Snapping it on was a breeze, although you do have to apply more pressure than feels comfortable with plastic clips. We can know get ice out of the external door system again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

35 of 48 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerMario from Oklahoma City, OK

Replacing still working but old and stained levers

The overflow grille was no problem. It just slides out. To get to the levers, you need to remove the front cover trim. Pay attention to where everything is before you remove parts and how the wiring is set up (over or under parts). There are two slots below the trim, use your blade screw driver and pop the trim. You'll notice that the 4 buttons for ice (crush - cube) and the light (off-on) are on that panel. I don't recall well, but I believe two screws (one at each side) hold that part in place. Once loose, I flipped it up, disconnected the white multi- wire quick connector and used duck tape to tape the panel to the door and keep it out of the way. Another screw keeps the levers in their place, with a metal element. Remove it and the levers will come out. The ice guide just snaps out from two sides and a middle plastic hook of the ice dispenser lever. Replace everything in reverse order. That's about what I remember. Hope it helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 21 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBrandie from Dover, AR

Ice was being made, but wouldn't drop

My icemaker wouldn’t pop out the ice. I bought a used fridge from 2nd Time Around in Russellville AR which was the most horrible customer service experience of my life. They were supposed to have a 60 day warranty but didn’t follow through. After months of begging them, and knowing what part I needed, I just ordered it myself. It was so easy and quick and fixed my issue my husband said we should have done that months ago and avoided the hassle. It was worth the money to have the peace of mind. Now everything is perfect! All we had to do was remove the icemaker, take off the side with a screwdriver, replace the part and slide it back in. We had ice in hours! Shipping was quick (a couple days) the part was 30 dollars cheaper than other places I checked. We love it!

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 10 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerBecky from Hamlet, NC

Ice bin drum blades broke into pieces wouldn't despense ice.

After removing a few screws to get to the drum my husband had it back to working like a charm.This part seems to be better made than the original part in the refrigerator.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 19 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerSerge from San Jose, CA

Water and ice dispensers were old with hard water

Some screw not easily accessible. I broke the ice dispenser mechanism but could glue it back so everything fine for now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 38