306944-1-M-GE-WR72X240-Drawer-Slide-Rail-Right-Side.jpg
306944-1-S-GE-WR72X240-Drawer-Slide-Rail-Right-Side.jpg 306944-2-S-GE-WR72X240-Drawer-Slide-Rail-Right-Side.jpg 306944-3-S-GE-WR72X240-Drawer-Slide-Rail-Right-Side.jpg

Drawer Slide Rail - Right Side

PartSelect Number PS306944

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Water dispenser will not dispense water.
  • Door won’t open or close.
  • Compare At

    $21.68
  • You Save

    $3.61
  • Your Price

    $18.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Slide Rail - Left Side

Part Number 306943

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.

$15.92
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 101 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerisaac from Bellevue WA

Old one broke when I put too much weight on the bottom shelf and the top drawer as this bracket supports both. Bad design.

Unscrew the two screws with a screwdriver and replace the new slide rail with the same screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

Customersteven from windsor mill MD

Slide rails were broken

I had to remove the food off the shelves, then i had to had to remove the shelves. I then took the refrigerator door off. I then removed the bins and removed the broken drawer rails. I then cleaned the area where the bins were. I then installed the new rails and put back the bins. I then reinstalled the refrigerator door and all the shelves. Last was putting all the food back in. Everything went very well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerREBECCA from SEMMES AL

Slide rails for drawer broke

1st I unscrewed the side rails after I removed the drawer. I saved the screws and both rails until I received the new ones.There were 2 screws in each side. 2nd I looked online at the parts select web page. The exploded diagrams were extreemly helpful. Like most people my appliance book does not have this feature. I ordered the 2 rails for the drawer on Sunday morning and the parts were here by Wednesday afternoon..very good service in my opinion. I then proceeded to replace the two side rails with the screws that I saved from dismantling them. I then put the drawer back into the refrigerator and it worked perfectly. This repair was easy and it saved me a $60.00+ dollar service call and a longer wait period to get the repair done! I will continue to use part select.com for all my appliance repair work. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJennifer from Lumberton TX

Shelf rail was broken from too many heavy items on it

Removed the glass top, and veg drawer. Unscrewed 2 screws holding the broken rail on. Replaced with new rail using old screws. Put the drawer and glass top back on. Done.

The Handle for the Veg drawer just snapped into place. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerScot from Rancho Cucamonga CA

Drawer fell

First I removed the two screws that held the slide in place. I then pulled the slide out and lined up new slide and reinstalled the screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPatricia from Conway AR

Broken side rail - vegetable drawer would not open and close

I removed the drawer and broken piece, then I screwed in the two screws to put the new piece in place. I then had trouble putting the shelf back in place due to the piece being a little bent. I loosened the front screw and was able to manuver the shelf in place with a little force. The new bracket works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customertrenton from Westville FL

Drawer slide rails broke by 3yr old son.

I removed the two screws on each rail and replaced the broke rails with the new ones. I can't beleve I put it off for a year. It took less then 15 min. encluding the time it took to order the parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerkristin from Newman Grove NE

The side rails broke off the bottom two shelves, maybe because the drawer was full of apples.

I removed the shelves & drawers, then unscrewed the side rails (2 screws in each one). After screwing in the new rails (I had saved the screws from the old parts -the new rails did not come with screws), I only had to place the drawer & shelf back in the fridge and the job was done. It took maybe 5 minutes to replace.
I ordered the parts late morning on day one, day two the UPS man was at my door while I was eating breakfast! Less than 24 hrs. from order to delivery!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerKenneth from Durham NC

The right drawer slide rail breaks in several places, for the 2nd time

1) The large drawer is first removed from the guide that remained on the side wall.

2) Removal of the light shield from the rear of the glass shelf to facilitate glass shelf removal by lifting the rear edge of the glass and remove it.

3) Unscrew two phillips head screws holding the remaining pieces of the plastic guide to the interior side panel of the fridge.

4) Examine the replacement guide and insure that the nylon guide and stop parts are clicked into place. If unsure, look at the guide on the other side to ensure that both are present and completely seated before installation of the replacement guide. (These usually fall out of the guide during shipping and should be in the bag with the guide!)

5) Once the guide is outfitted with the nylon guides, secure the new guide with the two phillips screws and DO NOT over tighten, remember you are dealing with plastic guide and steel screws going into a steel cabinet.

6) Re-install the glass shelf, followed by the light shield and finally the large drawer which should slide out smoothly to the stop and back closed without any drag.

7) A successful installation usually includes giving the drawer and glass shelf a good cleaning that probably could be done to the entire fridge side of the unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDarlene from Downingtown PA

Drawer slide broke

The drawer slide broke and I just removed the 2 screws that were still in the side of the refrigerator. I then screwed the new drawer slide in the same holes and it was done!! Simple, simple....even for me, the housewife.... ; )

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDodly from Pembroke Pines FL

My old drawer side rail was broken

I removed the two screws from the old broken rail using a regular star screw driver and replaced the new rail you sent us. Took only 2 mints to do all.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customercharlie from north augusta SC

No problems

I removed the screws and replaced the rails one at a time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAmanda from Plainfield IL

Slide rail cracked and eventually fell off

This was so easy! I got the part number off of the broken part, ordered online, and it was delivered the next day!!! So fast! Then I just unscrewed the broken part and reused the existing screws to install the new one. It took about 5 min.

Thanks for making everything so fast and easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHarold from Dansville NY

Crisper drawer would not stay in place on right side

I removed food from shelf over crisper drawer, then removed shelf and crisper drawer, removed two phillips head screws in right side rail and replaced rail.

Easy as 1-2-3

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKen from Fresno CA

Broken right rail

First take all your junk off the shelf (with the broken rail of course), take the glass shelf off. Remove screws (phillips). Throw away old rail. Replace new rail, tighten screws. Replace shelf, replace junk. You're done.

Help other customers find the most helpful instructions.

Were these instructions helpful?