306943-1-M-GE-WR72X239-Drawer-Slide-Rail-Left-Side.jpg
306943-1-S-GE-WR72X239-Drawer-Slide-Rail-Left-Side.jpg 306943-2-S-GE-WR72X239-Drawer-Slide-Rail-Left-Side.jpg 306943-3-S-GE-WR72X239-Drawer-Slide-Rail-Left-Side.jpg

Drawer Slide Rail - Left Side

PartSelect Number PS306943

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Water dispenser will not dispense water.
  • Compare At

    $19.58
  • You Save

    $3.26
  • Your Price

    $16.32
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Slide Rail - Right Side

Part Number 306944

$18.07
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 61 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerfrederick from williamsburg VA

Drawer slide rails broken

Order rails that where quickly delivered removed old rail slides and about 30 minutes install new set

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMegan from Pflugerville TX

Shelf support broke

Ordered the part on Monday, it was delivered Thursday morning, and installed in less than 10 minutes. Part Select is awesome, would definetly use again!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

Tools

CustomerFrederic from Boca Raton FL

A broken drawer rail, a broken door compartment and a leaking water line.

Repair done by a handyman on the leaking part. Used the diagrams and was able to identify the proper parts, using my training as a CPA. So that should tell you that the system works well and you can find most of the parts with an untrained eye and a bit of common sense.

Although I hope I don't have recurring need for this service, I laud the efforts of the creators to make it navigable even for us 2 left-handed accountants!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerGary from Lake Worth FL

2 verticle and 4 horizontal drawer brackets a broke

Removed(unscrewed) broken parts and replaced with new parts.
I suggest parts be marked left or right

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJ. Douglas from Grass Valley CA

Broken plastic parts

Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAnn from Merkel TX

Bottom shelf of frig caved in

The plastic slide rail that held up the bottom shelf of my frig as well as the top drawer had cracked & eventually broke. Being a widow who lives alone, I knew I could call my son to fix my frig - but I thought, maybe I could do this myself. I found the Brand, Model # & info I needed right on the inside of my frig. I did an internet search for Refrigerator parts, another first for me, found this web-site, then a diagram of my frig, I selected a part & ordered it. When it came in, I had ordered the slide for the bottom drawer & I needed the slide for the top drawer. I called the # from the invoice & got the nicest lady who found the correct part #, ordered it, then proceeded to process the return of the incorrect part I had ordered. The correct part came 2 days later & my credit card was immediately credited after they received the part I sent back. I was so excited to complete the "repair" myself, then with great pride I got my screw driver and changed out 2 screws - "completing my first repair job, all by myself". I diagnosed the problem, ordered the part & completed the repair without help from my family. I was very glad to add this web site to my Favorites. A great big ThankYou to Parts Select !!! Ann Payne

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDouglas from Melbourne Beach FL

One drawer rail broke so we decided to replace both (preventive maintenance!)

The replacement was easy except for the difficulty in keeping the screws aligned in the recessed hole in the rail to the refridge rail (I didn't have a magnetized screw driver). By placing some scotch tape on the outside of the rail over each screw hole, and then "pusing" the screws through the scotch tape, the screws stayed put while I aligned the rails and screwed them into the fridge.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCharles from Hattiesburg MS

Drawer had been falling off the rails for several years and finally decided to look for parts.

The left and right rails came in quickly by UPS and after opening the box, I compared to old parts and found they were an exact match.

I then proceded to remove the two defective rails. It was quite simple. There were 3 phillister screws holding on each rail. I simply removed the old rail one at a time and replaced with the new one in reverse order of removal.

After replacing both rails, I replaced drawers and now no more drawer dropping. I only which I had discovered Parts Select.com 2 years ago. It was simple to order, amazingly could still get parts, and clear diagrams and easy to identify part numbers. I will refer to this company in future for all of my parts needs if available.

Thanks,
Charles from Hattiesburg Mississippi.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Crofton MD

Old parts broken and or cracked so drawers didn't open easily and shelves were uneven

First I removed the drawers and shelves. Then I removed the left and right trim pans (1 screw ea). Next I removed the two screws (8 total) for each of the left and right drawer slide rails and rail assemblies. Then I spent way too much time cleaning the bottom half of my refrigerator, the shelves and drawers! After finishing the cleaning, I installed the lower left and ride slide rails (2 screws ea). Then I installed the upper left and right slide rails (2 screws ea). I then installed the left and right trim pans (1 screw ea). After that I set the bottom shelf and drawer in and then did the upper shelf and drawer.

The packaging was OEM, clearly marked too. The hardest part of the job was cleaning my refrigerator!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDianne from Barrington IL

Drawer very difficult to open

Removed the old part using a phillips screw driver, cleaned the area, screwed in the new part, replaced the drawer. It was very easy to do, didn't even have to call my husband.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSamra from Framingham MA

Drawer slide rail- left side was broken

I just took the broken one and replace it with the new one that I ordered. very easy. Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMary from Muldoon TX

The plastic slide attached to the inside wall of the refrigerate that supports the bottom shelter and one of the lower drawers broke.

We went for months not knowing where to get the part we needed until my husband found your site on line. The first part we received was wrong, but with the help of your operators, we then received the correct part. It was only a matter of removing two screws, placing the slide and then putting the 2 screws back in. It was a snap.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerVaughn from Aurora CO

Broken drawer slides

This was a very easy repair. I simply removed the screws that held the drawer slide rails and trim pans, and replaced the broken parts. No sweat!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerSam from Parkton MD

Broken left side drawer rail

First I removed the glass shelf on top of the drawer. I then removed the drawer and unscrewed the old drawer rail. After this I cleaned everything, screwed in the new drawer rail, reinstalled glass and drawer and I was finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKevin from Hebron CT

Original part broke right at the screw junction - drawer sagged

Piece of cake - just unscrew the screws and put the new piece on, replace the glass top and replace the drawer. No brainer. Don't ever pay someone to do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?