| |
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJohn from Marietta GA
Broken drawer rails
Removed the screws holding old rails on, replaced with new rails - using opposite side to gain an understanding of the small plastic pieces and how they were to be placed. there were on directions with the parts. The age of the refridgerator contributed to the need to thourally wash the area's behind the rails - what a pain to get gunk off. the area is small and is somewhat tight to get into. the Parts came remarkably quick and that was a great surprise- thanks
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRamona from Woodbridge VA
The left side glides broke on meat and veggie drawer
Removed 4 phillips screws from old drawer glides (keep the screws). Placed new drawer glides in place with 4 phillips screws. REALLY EASY. Also replaced the drawer cover gaskets, take off, put on by hand. Like a new fridge!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerRichard from Kalama WA
Both light switches bad and crisper rail broken
It was REALLY EASY to ID the parts with your website. I found exactly the rail I needed, and it recommended I buy the other rail as well. Since they were both 15 years old, that sounded like a good idea. The rails installed in about 10 minutes total. Two screws on each rail.
The door switches were more challenging, but it was because there was a lot of sticky soda on our old door switch, making me think it somehow needed other tools to remove it. No, just patience and effort. Once I removed all sticky stuff from the old switch, it pried out with a flat head screwdriver, the wire plugs came right off, and plugged in the new one. 10 minutes to get the old part out, 1 minute to put the new part in!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerLinnea from SAlisbury NC
Slides on 2 drawers were broken
First I removed 2 screws on each slide, removed the broken slide, replaced each slide with 2 screws. Done.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerEDDIE from WINSTON-SALEM NC
Door slide rails broken
Removed old worn out slide rails and replaced them with newer ones.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerMonroe from Largo FL
Replace rubber parts in ice maker unit & drawer slide rail
Popped off cover plate on front of freezer door. Removed rubber pad & frame covering dispenser switch. remove 4 screws & pulled out assembly far enough to unplug power connector & unit comes out completely. removed old parts, & cleaned unit (Remove circuit board & switch to submerge)installed new parts & reinstalled. Drawer slide replacement is simple. two screws.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerMartha A from Brooklyn NY
Drawer slide rails were broken.
I removed the broken parts and replaced them with the new parts. It was a very easy job.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerThomas from North Haledon NJ
Broken rail
removed broken rail and replaced two screws and the job was complete...took longer to clean the botom of the refrigerator than replace the part
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJorge from Aventura FL
Rusty and broken plastic parts
It was just a matter of replacing the broken parts, and reassembling the ice machine. Nothing too difficult.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSTEVE from DANDRIDGE TN
Broken brackets
REPLACE BRACKETS AND PERFORMED A LONG OVERDUE FRIDGE CLEANING
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJames W. from Columbus MS
The crisper bin slides had broken
Removed the bins, and the broken rails. The rails for the upper bin is made for three screws in each rail, and they were installed with only two screws, ehe front and back screws were installed and the middle screw holes had never been drilled for screws. Install the new rails with the front and back screws, then "CAREFULLY" use an electric drill to drill the middle screw holes, and install the middle screws. These screws help relieve the pressure on the front screws when the drawer is pulled out.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerWilliam from Denver NC
Drawer slide rails broken on both sides
SIMPLY USED SCREWDRIVER TO TAKE OFF BROKEN RAILS AND REPLACED WITH THEM NEW ONES WE RECEIVED.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customersalvatore from miamisburg OH
|
0 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKevin from Orange CA
Drawer slide rail broken
Since I ordered the right part thanks to the website, installing was easy. I just put the part in place and screwed the two screws into place. It took less than 2 minutes.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerCAROLE from WESTERLO NY
Slide rails broken
Had to unscrew the slide rails from both sides of
refrigerator and insert the new slide rails. When the baskets were inserted and slid with ease I knew I had installed them properly
|