Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306913
This part works with the following brands: GE, Hotpoint & Kenmore.
For the past 6 months I've dreaded trying to find the parts and make the needed repairs to the slide rails. I just didn't have time to search for part numbers and drag all the tools out. I even contemplated buying a new frig. I thought I would have to find the original "Owners Manual". How stupid was I? Within 15 minutes the model number was determined and the parts (VERY EASY to find the exact part) were ordered. They arrived within a week (in a GE wrapper). I unscrewed two parts per rail and within minutes the repairs were done. It took me a lot longer to clean and wipe down everything to make the refrigerator look like new again. I bragged to all my friends (like I was some type of engineer) and have referred this website to many of them. What a fantastic experience. I saved over $1,200 and the hassle of moving a frig in and out of the house. Glad you're in business and on the web.
Help other customers find the most helpful instructions.
Were these instructions helpful?
We took the drawers out unsrewed the slide rails, screwed the new ones back on and replaced the drawers. the door cam was alittle harder because we had to lift the door to put it in but it still took under 10 min. altogether it took about 25 minutes. I am also planning on buying a few more parts from the company so I will end up paying about $50 to fix a fridge that I got for free. WHAT A GREAT DEAL!!!!!
It was very simple, took out the slide rails and took a screwdriver and assembled. My wife was very pleased to have these drawers in working order once again.
At first it appeared all was lost since the sales and sevice facility said parts for our GE refrigerator were no longer avalible. We were looking at a $1200 dollar purchase. We decided however to research the internet and see if parts could be obtained. We found Parts Select and to our suprise parts were readily available. We order the drawer side rails and received them within days. The repairs were completed in minutes and for less the twenty bucks. Steven
Popped off cover plate on front of freezer door. Removed rubber pad & frame covering dispenser switch. remove 4 screws & pulled out assembly far enough to unplug power connector & unit comes out completely. removed old parts, & cleaned unit (Remove circuit board & switch to submerge)installed new parts & reinstalled. Drawer slide replacement is simple. two screws.
Removed the storage bins, unscrewed the old rails, screwed in the new rails and saved a Sears service call plus their mark up on the parts. Estimated savings was about $100.
I replaced all the parts and it was easy. I still need a door drawer that I will get later.
unscrewed 2 screws per rail, replaced with new rails with 2 screws each - couldn't have been easier
remove the 8 screws 2 for each railinstalled the new railsslid in the meat drawer and glassslid in the vegetable drawer and glasspresto - like new fridge !
First removed the old sliders, then screwed in the new sliders, replaced all four within minutes.
Each rail required removing two screws which were used to install the new rail. Each one took about 5 minutes however cleaning the recesses was the most effort.
Unscrewed old ones, screwed in new ones. Really simple and fast. Took awhile to decide which rails to buy at first, but pictures online really helped.
It was REALLY EASY to ID the parts with your website. I found exactly the rail I needed, and it recommended I buy the other rail as well. Since they were both 15 years old, that sounded like a good idea. The rails installed in about 10 minutes total. Two screws on each rail.The door switches were more challenging, but it was because there was a lot of sticky soda on our old door switch, making me think it somehow needed other tools to remove it. No, just patience and effort. Once I removed all sticky stuff from the old switch, it pried out with a flat head screwdriver, the wire plugs came right off, and plugged in the new one. 10 minutes to get the old part out, 1 minute to put the new part in!
Remove broken rail by unscrewing two phillips screwsDiscard broken railHold replacement rail in place with left hand, tighten phillips screws with standard phillips screwdriver.Wash scratch marks off bottom of fridge caused by drawer sliding on bottom of applianceSlide veggie drawer into place, smile at wife, receive praise.
Removed cats tail and proceeded to look for parts on line. received parts. stacked a set of books under raised door after unloading items from door to reduce wieght unbolted both sides of hinge. Reassembled both hinges. pulled books out and done in 15 minutes. Works better than new!! The cat no longer goes near the open doors. Fixed 2 problems!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.