Quick Question!

Have you ever purchased from PartSelect.com before?

306911-1-S-GE-WR72X207          -Drawer Slide Rail - Left Side
306911-1-S-GE-WR72X207          -Drawer Slide Rail - Left Side 306911-2-S-GE-WR72X207          -Drawer Slide Rail - Left Side 306911-3-S-GE-WR72X207          -Drawer Slide Rail - Left Side http://www.partselect.com/Schematics/GE/00001739i03.gif

Drawer Slide Rail - Left Side

PartSelect Number PS306911

This drawer track supports the left hand side of the sliding drawer.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$29.30

You Save

$4.88

Your Price

$24.42
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Slide Rail - Right Side

Part Number 306910

This drawer track supports the right hand side of the sliding drawer.

$25.54
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 48 reviews What's this?
 

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joanne from West Columbia, SC

Needed left and right drawer rails for crisper

I was so pleased to find your website. We have just one company here in Columbia,S.C. that sells refrigerator parts. I did find out that they wanted about $60.00 for both pieces. Needless to say,I was just going to do without. I knew there had to be someone else. I found you guys on line,ordered my parts for a little over $5.00 a piece,and I put them in myself. I'm talking standard GE parts,not knockoffs. I am so pleased. Thanks for being there. I tell everyone about you.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Cindy from Manhattan, KS

Broken slide rails

Removed broken slide rails (2 screws per rail) and replaced new rail. Easy as drinking my morning coffee.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Drawer Slide Rail - Left Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Trevor from Columbus, OH

Broken rail

After fixing my washer this was a snap. After lifting out drawer and shelf only two screws needed removal. I think it was easier putting it back together! It is sites like these that make it possible for men to feel like men!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Drawer Slide Rail - Left Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Craig from Charlotte, NC

Drawer would not slide in and out as designed.

I removed the screws holding the remaining portion of the slide rail in place. I was able to install the new rail by simply attaching the part to the fridge using the same screws. Having an electric screwdriver made the job very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: John from Marietta, GA

Broken drawer rails

Removed the screws holding old rails on, replaced with new rails - using opposite side to gain an understanding of the small plastic pieces and how they were to be placed. there were on directions with the parts. The age of the refridgerator contributed to the need to thourally wash the area's behind the rails - what a pain to get gunk off. the area is small and is somewhat tight to get into. the Parts came remarkably quick and that was a great surprise- thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Cynthia from Yakima, WA

Broken drawer guides in rental refridgerator

Piece of cake, unscrewed two screws on each drawer guide and simply relaced the new sides. Fit was perfect and fridge is like new again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ramona from Woodbridge, VA

The left side glides broke on meat and veggie drawer

Removed 4 phillips screws from old drawer glides (keep the screws). Placed new drawer glides in place with 4 phillips screws. REALLY EASY. Also replaced the drawer cover gaskets, take off, put on by hand. Like a new fridge!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Vadim from Pleasanton, CA

The side rails and one of the drawers were cracked.

Ordering was easy and delivery was fast. BUT, the parts I received were not exactly the same as the ones I was replacing, even tough I certainly used my fridge model number when ordering the parts.

As a result the assembly is awkward, one of the rails did not fit and had to be cut half an inch shorter or so (there was some cover on the back of the fridge which prevented the rail from installing).

The rear mounting holes for all four rails also needed to be drilled anew.


The old drawer does not quite match the new rail either.

Overall I am not impressed. But to the partselect credit - the fridge is fairly old, 12 years.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Linnea from SAlisbury, NC

Slides on 2 drawers were broken

First I removed 2 screws on each slide, removed the broken slide, replaced each slide with 2 screws. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Drawer Slide Rail - Left Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ralph from Pagosa Springs, CO

Broken drawer slide rail

I unscrewed the broken slide rail and screwed in the new one. Voila!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Jorge from Aventura, FL

Rusty and broken plastic parts

It was just a matter of replacing the broken parts, and reassembling the ice machine. Nothing too difficult.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Scott from Salisbury, MD

The slide rails had broken over the years through normal wear and tear. The drawers would not track properly or at all.

It was a simple matter to just unscrew the remaining pieces of the old slides and then screw in the new parts. Because I had waited until several needed replacing, it was important to make sure I had the right part for the right side and the right drawer.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Samuel from Ashaway, RI

Slides and shield cracked/22 yrs old???

too simple to explain---unscrew 4 screws-screw in 4 screws!!!shield snaps in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Slide Rail - Left Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Barry from Ashland, VA

The side rail which the vegitable drawer slides on and the top glass rests was broken form too much weight.

Repair was very simple. Removed the glass and drawer. Unscrewed the two screws holding the rail on. Put the new rail on with the same screws. Replace the glass and drawer. What was really cool was pluging the modle number into Google and your site was one of the top three. The brand name was different, but the refrigerator was identical. Must have been sold under more than one brand name.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Slide Rail - Left Side
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mary Helen from San Antonio, TX

Plastic rail broke

Unscrewed broken rail and screwed in new rail. The best thing was how easy it was to identify the part I needed and the prompt delivery of the part once I ordered it. Thank you very much. I was very pleased with your service.

Help other customers find the most helpful instructions.

Were these instructions helpful?