| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerRichard from Kalama WA
Both light switches bad and crisper rail broken
It was REALLY EASY to ID the parts with your website. I found exactly the rail I needed, and it recommended I buy the other rail as well. Since they were both 15 years old, that sounded like a good idea. The rails installed in about 10 minutes total. Two screws on each rail.
The door switches were more challenging, but it was because there was a lot of sticky soda on our old door switch, making me think it somehow needed other tools to remove it. No, just patience and effort. Once I removed all sticky stuff from the old switch, it pried out with a flat head screwdriver, the wire plugs came right off, and plugged in the new one. 10 minutes to get the old part out, 1 minute to put the new part in!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers, Wrench(Adjustable)
CustomerWilliam from Austin TX
Light out in freezer. Water valve inoperative.
Light switch- Removed old switch light using flat head screwdriver, removed wiring harness, attached new switch and reinstalled.
Water Valve- Removed dust panel, removed old valve, including water inlet and outlets (2) and remove wiring harness. switch water inlet line from old switched to new. Installed wiring harness on new valve. Had to drill pilot hole in refrigerator cabinet to match new frame holding water valve. Installed valve, reconnected water outlets (2). reinstalled dust cover.
|