294037-1-S-GE-WR17X4310         -Ice Bucket and Auger Assembly
294037-1-S-GE-WR17X4310         -Ice Bucket and Auger Assembly 294037-2-S-GE-WR17X4310         -Ice Bucket and Auger Assembly 294037-3-S-GE-WR17X4310         -Ice Bucket and Auger Assembly http://www.partselect.com/Schematics/GE/GE_Thumb/00004788i02.gif

Ice Bucket and Auger Assembly

PartSelect Number PS294037

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $250.63
  • You Save

    $41.77
  • Your Price

    $208.86
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 7 reviews What's this?
1-5 of 7
 

26 of 33 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerFrank from Las Cruces, NM

Ice make auger rusted, unable to serve clean ice.

Replacement auger and ice bucket assembly was perfect. Just had to remove the front door/flap assembly from the old unit and screw on to the new. The water filter kit took more time to read the box instructions than it did to install. Perfect. Am very pleased with the service/value offered by PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 12 people found this instruction helpful

Parts Used

  • Ice Bucket and Auger Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerConrad from Oglesby, IL

Replace icemaker

I slid the old ice maker (which was rusty) out of the freezer. I emptied the ice cubes. I unscrewed the 3 screws holding the plate to the old ice maker. I attached the original plate to the new ice maker/ auger unit with 2 screws. The new icemaker assembly did not match up with a 3rd screw hole. The 2 screws seem to be holding securely.
I reinserted the new assembly. Shorly after this nice clean ice cubes began to form. Works very well!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Ice Bucket and Auger Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerdavid from frankston, TX

Rusty auger and crusher broke

as simple as taking off 4 screws from door of old one and putting door on new one and putting bucket back in place

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Ice Bucket and Auger Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Lafayette, CA

The original ice auger jammed and destroyed the original icemaker

The replacement part was an exact fit and slipped right into the space where the old one was. No tools needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

  • Ice Bucket and Auger Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerWilliam from Miami, FL

The auger in the ice became rusty

Once I received the New part, I simply removed the old one, unscrew the door assembly off of the old one and reinstall it on the new one using only 4 screws. Then simply pluged in the New Ice Bucket. If it were any easier, My Kids would have done it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 7