Make sure you haven't got the discount earlier.
Door Handle Kit WR12X869
Rated by 12 customers
Really Easy
15 - 30 mins
Ratings submitted by customers like you who bought this part.
Door Handle Kit Specifications
How Buying OEM Parts Can Save You Time and Money
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- 2
- Next >
2. On the top trim piece, insert the rounded knife tip at the very top of the trim. Knife should be inserted between the outer chrome strip and the white strip that runs down the center of the trim ... Read more .
3. Then twist the knife to gently pry the top of the white strip away from the chrome strip.
4. Once this is done, gently use your fingers to free the white strip all the way down to the center handle, popping the strip free at its bottom. Don't be in a hurry and be gentle, or you may bend the sheet metal white trim piece and ruin its appearance for re-installation.
5. Repeat the same for the lower door trim, though this time starting at the bottom of the door and working the white strip loose in the upward direction. For future reference, I made sure I labelled each piece temporarily with marked masking tape to keep track of which strip came from the top, and which from the bottom. This way, I could re-install them in their original positions.
6. At the top and bottom of the middle plastic handle, there were now visible single screws which held the chrome pieces securing the plastic handle to the door. (They had been hidden by the white filler strips.)
7. Remove both of these screws, saving them for re-use in the re-installation process.
8. Remove the two chrome pieces. It is a good time now to thoroughly clean the white strips and all door parts.
9. Remove the old plastic pull handle from its two chrome end pieces, replacing it with the new white plastic pull handle.
10. Use the two saved screws to re-attach the new pull handle to the door.
11. Starting at the top, gently pop the old top white center strip into the upper chrome trim piece track.
12. Gently work the full length of the white center piece into the chrome trim piece moving slowly from top to bottom. Take care to be gentle and avoid bending the white strip by being in too much of a hurry.
13. Do the same to the bottom trim, though starting here at the bottom and working upwards to the pull handle.
You are done and your fridge now looks like new!
-
Robert from PARK RIDGE, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
-
Cindy from BROOKLYN, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Arthur from Camarillo, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Wilfred from Miami, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Doug from Brunswick, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
jon from alameda, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Got my parts in less than two days. Postage on the first one (handles), none on the second order (strips).
Great.
-
Georgia from Atlantic Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Errol from Locust Grove, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Lynelle from Jacksonville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2. Remove the two screws fastenig each door handle to its door. Remove handles.
4. Secured each new door handle to its door with existing screws.
5. Clean and reinstall trim pieces.
-
Richard from Santa Barbara, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
- < Prev
- 1
- 2
- Next >
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
4 people found this helpful.
3 people found this helpful.
- < Prev
- 1
- Next >
Manufacturer Part Number: WR12X869
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.