249244-1-M-GE-WB44K5009-Broil-Element-240V.jpg
249244-1-S-GE-WB44K5009-Broil-Element-240V.jpg 249244-2-S-GE-WB44K5009-Broil-Element-240V.jpg

Broil Element - 240V

PartSelect Number PS249244

This oven broil element has push-on terminals.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Little or no heat when broiling.
  • Cooktop element not heating.
  • Little or no heat when baking.
  • Oven not heating evenly.
  • Compare At

    $47.34
  • You Save

    $7.89
  • Your Price

    $39.45
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 19 reviews What's this?
16-19 of 19
 

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element - 240V

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerHarden from Lynchburg VA

Element burned out.

I spent half an hour finding my driver set. It took about 25 minutes to turn the power off, remove the racks and element and replace the new elements.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element - 240V

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerBeverly from Baton Rouge LA

Burned out broil element

.Received the part promptly. Installed it in about 30 minutes. With appliance servicemen, I figure I saved about $200.00 doing it myself. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element - 240V

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsWrench set

Customertim from fort scott KS

Upper over broil unit burned out

This part is a plug-in unit - two screws off; unplug the old unit; plug in the new unit; two screws on. Very simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerAaron J. from Bartlett TN

Oven elements were not heating properly.

I had to remove two screws that held these elements in place from back of oven; pull the elements out about three inches to disconnect two wires; connected wires to new elements and
replaced two screws.

A very easy job to perform thanks to right parts from PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16-19 of 19