BBB A-Plus
http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/56478.gif
See part 2 in the diagram

Lower Bake Element

PartSelect Number PS2362492

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little or no heat when baking
  • Cooktop element not heating
  • Oven not heating evenly
  • Will not start
In Stock

  • Compare At

    $38.41

  • You Save

    $6.40

  • Your Price

    $32.01
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 4 NEXT > 46-48 of 48

 

0 of 2 people found this instruction helpful

Parts Used

    • Lower Bake Element

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customersandra from Lake Placid FL

Bake element lower

Repair co. wanted $127.00 to come to our home to est. repair , plus time, labor, and parts. I used screw driver to take (2) screws out and pulled element out , inserted new element , and tested oven with temp. gauge. End of story !! saved at least $150.00 thank you!!! for having the parts. so easy a man that lives in a cave could do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Lower Bake Element

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customermarla from kansas city MO

Heat element would not heat

My husband did the repair work in less than 15 minutes. He was happy and I was happier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

    • Lower Bake Element

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDorcas from New Martinsville WV

The oven was not heating

The repair went well. It was very easy. My husband removed the old element, rmoved the screws at the back of the oven, also the electrical connections. then put the new element in place connected the electrical clips, put the screws in place and the installation was complete. A screwdrive was all that was needed.
There were no instructions included with the part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 4 NEXT > 46-48 of 48