Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GGE350LWB00

GGE350LWB00 Whirlpool Range - Overview

Get Parts and Repair Help for GGE350LWB00

If you know the range repair part you need, you can browse the list of all parts on the GGE350LWB00, or you can search by name or part description. You can also find your part by where it is located on the GGE350LWB00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GGE350LWB00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 9 hrs and your part ships today!
$29.46

Long Oven Sensor

This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.

Order within the next 9 hrs and your part ships today!
$46.01

Broil Element - Push On Terminals

This broil element is found on the roof of the oven.

Order within the next 9 hrs and your part ships today!
$35.78

Upper Bake Element - 240V

This bake element is found on the bottom of the oven.

Order within the next 9 hrs and your part ships today!
$66.33

Inner Door Glass Pane

Glass only.

Order within the next 9 hrs and your part ships today!
$7.22

Touch-Up Paint - White

18ml

Order within the next 9 hrs and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 9 hrs and your part ships today!
$31.34

Door Hinge - Left or Right Side

Sold individually.

Order within the next 9 hrs and your part ships today!
$81.53

Exterior Oven Door Glass - White

This is just the outer glass - it is not the complete door assembly.

Order within the next 9 hrs and your part ships today!
$8.01

Handle Bracket - Right Side

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not holding 350 F, when cooling the coils did not reheat

  • Customer: David from Westford, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 105 of 121 people found this instruction helpful
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. ... read more

Upper broiler element (of upper over) burnt out

  • Customer: Todd from San Antonio, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 49 of 53 people found this instruction helpful
This particular model has a bracket that holds the element close to the oven ceiling, so I had to unscrew that as well as the element mounting screws on the back oven wall. The hardest part (not that hard) was the connectors were really tightly clamped to the element terminal. I had to use pliers to help wiggle them off the tips. Recommend doing this very... read more

The Burner was getting too hot and you could not regular the tempature

  • Customer: Dennis from Hagerstown, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 44 of 50 people found this instruction helpful
Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and replaced it with the new one read more