| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSharon from Yacolt WA
Store-bought drip bowls wouldn't fit.
My elements just plug in so all I had to do was pull them out and replace the drip bowls. They fit perfectly!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerCHARLES from SOMERSWORTH NH
Cooktop elements worked intermittantly.
TURN THE POWER OFF TO THE UNIT. REMOVE THE COLD ELEMENT BY LIFTING UP AND PULLING OUT. REMOVE THE DRIP PAN. REMOVE THE ELEMENT PLUG SCREW AND PULL THE PLUG UP AND OUT OF THE SOCKET. CUT THE LEADS TO THE PLUG AS CLOSE TO THE PLUG END AS POSSIBLE TO ALLOW ENOUGH WIRE TO SPLICE THE NEW PLUG IN. STRIP THE INSULLATION BACK 3/8" TO ALLOW FOR SPLICING. INSTALL THE SHRINK TUBE COLLAR ON THE WIRE AND PLACE ONE NEW LEAD (PRESTRIPPED AT THE FACTORY)NEXT TO THE OLD WIRE AND PLACE THE WIRE NUT PROVIDED OVER THE BARE WIRE ENDS AND TWIST IT ON UNTIL IT IS TIGHT. BEND THE WIRE NUT SPLICE BACK OVER ONE OF THE LEADS AND SLIDE THE SHRINK TAPE OVER IT. HEAT UP THE SHRINK TAPE WITH A HAIR DRYER TO MAKE IT TIGHT OVER THE WIRE NUT CONNECTION. REPEAT THE PROCESS FOR THE NEXT LEAD. SLIDE THE LEADS INTO THE NEW SOCKET. INSTALL THE SOCKET AND SECURE THE THE NEW SCREW PROVIDED. REINSTALL THE DRIP PAN AND PLUG IN THE HEAT ELEMENT. FOLLOW THE SAME PROCEDURE FOR EACH ELEMENT SOCKET REPLACED. TURN THE POWER BACK ON.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLowell from Hardin KY
Couldn't find correct drip bowls that fit.
Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerFrances from Summerfield FL
Replaced old drip pans
Fastest, easiest thing I have ever done! I got my orders so fast it was unreal! Hurrah for good old American know-how. I will always recommend these good people!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMiles from Apache Junction AZ
Had 2 bad cooking elements and needed 4 new pans for the burners
Ordered the parts and when I received them I simply removed the old ones and replaced them with the new ones. No tools were required.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerWalid from Worcester MA
Bowl -drip and gasket
it was relay easy when you get the right pats .so
Thanks for .
PART Select.
Best regard .
Walid
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerjohn from donna TX
Drip bowls very dirty and stained
Remove burner elements. Remove old drip pans. Thoroughly clean stove top under drip pan edges, and under top cover. Install new drip pans. Install burner elements.
I never seem to be able to find the correct replacement drip pans at retail outlets in the quantities I need. Your parts identification, selection and ordering processes were simple and delivery was faster than I hed expected.
Thank you
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAnn from Cadiz KY
Just needed new drip pans for burners
Was glad to get the correct ones for a 30 year old stove. Had already wasted $12 shipping trying to order from someone else.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJanet from Philadelphia PA
Electric coils would not stay flat as drip pans were incorrect fit
replaced drip pans with correct type
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerglen from stamford CT
Drip bowls rusted I replaced them
remove elements and replace bowles
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSandra from Oldsmar FL
My drip pans were in bad shape
I removed the old and repaced with new. I never ordered anything one day and got it the next. I'm impressed
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerkathryn from piqua OH
The old drip bowls were rusting, no chrome left
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
|