Models > 1151WD-36

1151WD-36 Hoover Cooktop - Overview

Get Parts and Repair Help for 1151WD-36

If you know the cooktop repair part you need, you can browse the list of all parts on the 1151WD-36, or you can search by name or part description. You can also find your part by where it is located on the 1151WD-36 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for 1151WD-36 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 1151WD-36

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.01

Chrome Drip Bowl - 8"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

$4.00

Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

Order within the next 1 hr and 52 mins and your part ships today!
$7.67

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

Order within the next 1 hr and 52 mins and your part ships today!
$49.61

Surface Burner Element - 8"

This large surface burner is 2100W.

$55.30

Surface Burner Switch Kit

This switch controls the stove top surface burner.

Order within the next 1 hr and 52 mins and your part ships today!
$2.68

Screw - 6-32 x 5/16

Sold individually.

$23.25

KNOB- SURF

NUT- SWITC

GRIDDLE

COVER, GRIDDLE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were burned and tacky

  • Customer: Donna from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 461 of 460 people found this instruction helpful
First I removed the old bowls and replaced them with the new. read more

Drip bowls needed to be replaced

  • Customer: John from Chester, VT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 447 of 526 people found this instruction helpful
took old bowls out, put new bowls in, took a coffee break read more

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 136 of 147 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more