2339239-1-S-Frigidaire-316439801-Surface Element - 6"
2339239-1-S-Frigidaire-316439801-Surface Element - 6" 2339239-2-S-Frigidaire-316439801-Surface Element - 6" http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/Q1IFPO1W.gif

Surface Element - 6"

PartSelect Number PS2339239

This element has looped terminal ends and comes with a black medallion center.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $13.39
  • You Save

    $2.23
  • Your Price

    $11.16
In Stock
Order within the next 5 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Element - 8" - 2600W

Part Number 2339242

This coil element has looped terminal ends.

Order within the next 5 hrs and your part ships today!
$14.34
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 10 reviews What's this?
1-5 of 10
 

18 of 21 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerSteve from North Troy, VT

Replaced elements

pull the element out and slide the new element in.No tools needed,it's that easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 20 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerMatthew from Columbus, IN

Burners on 53 year old range kept going out

When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 10 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerGilbert J from HERCULES, CA

To replace the termianl block and the elements

I ordered the correct parts(elements) and PartSelct sent the correct Frigedaire substitute parts.One of the 3 piece metals underneath the element is too long and the element does not fit on top of the bowl of the burner. Frigidaire should make the right substitute parts (elements) for that model.The terminal block took sometime to replace and it works with the old element.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerJoe from Mount ephraim, NJ

No power to element/no heat

removed burnt out terminal block, installed new- I soldered wires instead of using wire nuts, took a little extra time, but I feel it's a better connection. I later found that my rotary control must have burnt out too, I swapped it with one from another burner. I'll be ordering a couple rotary controls next from this company. All parts were nice quality. Received quickly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerDonald from Canandaigua, NY

Went go use oven and need heard a pop and dust smoke coming out vent , found lower element blew apart, since only store around was sears they didn't have part,so my son found your web site. So odered it came in 2 days, while going to order oven element we knew that one of the stove burner wasn't he

just unplug stove and unscrewed element out of back wall cleaned up mess and reinstalled. stove top you just pull out bake element and push back in

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 10