Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven would continue to heat after set temperature was reach/indicated on the display panel.
First had to determine what was the source of the problem. Removed the back panel to expose the heating element connections. Cycled thru the different oven settings; bake, convection bake, roast. convection roast and broil, while checking the voltage on the 3 heating elements; upper, convection and lower elements. As the oven cycled thru
... Read morethe different temperature settings the volt meter showed that the lower element would not shut down when set temperature was met. Checking the wiring diagram showed that the culprit was probably that the lower element relay in the relay panel was not cycling as required. Decided that replacing the relay panel would fix the problem, and it did. Replacement of the relay panel was very easy and the PartsSelect part was the exact part required.
Read less
Darrell from Freeland, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Todd
October 11, 2021
Having e15 error message for stove looks like this board should repair my problem what happens if it doesn’t?
For model number CEW30IF6ISB
Hello Todd, Thank you for the question. The E15 error code is a communication problem for the ESEC-UIB Board. We suggest checking the wire harness if the Board did not fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Steven
May 25, 2023
Both upper and lower ovens continue to heat well beyond the setpoint. Started acting up after we did the self-cleaning procedure. Where do I start on trouble shooting?
For model number EW3LDF65GSA
Hello Steven, thank you for the question. According to our research, if both ovens are too hot, then you may need to check the electronic control board, part number PS2378972, to fix the issue. We hope this helps!
