Models > CEI30EF5GSE

CEI30EF5GSE Electrolux Range - Overview

Get Parts and Repair Help for CEI30EF5GSE

If you know the range repair part you need, you can browse the list of all parts on the CEI30EF5GSE, or you can search by name or part description. You can also find your part by where it is located on the CEI30EF5GSE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for CEI30EF5GSE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CEI30EF5GSE [Viewing 5 of 5]

$3.51

Main Terminal Block Kit

$7.64

ANTI TIP KIT

$28.21

Oven Probe

$77.64

6" Radiant Element with Limiter - 1200W

$5.27

Screw

Sold Individually.

$7.09

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

$4.23

Steel Washer

Size: 3/4 inch od x 1/4 inch id

$103.68

ELEMENT-DUAL

$52.64

Oven Door Latch Motor and Switch

$4.65

Leveling Leg

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cord was not tightened enough by delivery crew.

  • Customer: Timothy from Spring Valley AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 33 of 55 people found this instruction helpful
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screw... read more

Oven wouldn't operated. Error code F9

  • Customer: Richard from Centennial CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 19 of 22 people found this instruction helpful
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws ... read more

anti-tip bracket not installed

  • Customer: Brian from Panama City Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 15 of 19 people found this instruction helpful
I was selling my home and did not realize that the anti-tip bracket was not originally installed. A home inspection caught the problem and the buyers required that I install one. I could not find the original and obviously the installer never put it in place to begin with. The buyers wanted this resolved within a week so I had to act fast. I could not fi... read more