| |
13 of 14 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Socket set
CustomerGeoffrey from Endicott NY
Door gasket was torn - not sealing properly. Kickplate clip had broken off
Gasket:
Unfolded gasket from package. Laid it out on counter. Used hair dryer until gasket laid flat and all fold creases were gone.
Loosened the top screws and screws along the sides from the top down with the exception of the bottom three screws. Removed old gasket except for the bottom. Fit in the new gasket on top and down the sides. When the old gasket was met, removed the lower three screws and bottom ones. Totally removed old gasket and slipped in new one. Lightly tighened screws, made sure seal was good, Finished tightened all screws. Heated gasked with hair dryer to remove wrinkles. Done.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Refrigerator Kick Plate Grill Clip
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerPaul from Overland Park KS
Front grill was missing when we moved in and I noticed the left clip was missing
Well first of all the grill was not only missing a clip on the rleft side of the fridge, but after recieving the new one I studied teh one still on and noticed that the plastic stand off that holds it was busted off. So I got the handy dandy junk screw box out and found a screw that fit tightly inside the plastic standoff center and screwed the cip to the grill that way.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Refrigerator Kick Plate Grill Clip
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMeghan from San Diego CA
One side of the kick plate grill was broken (faling of fridge).
Popped off the grill via the one remaining clip. Used a flathead screwdriver to pop the old, broken clip off. Then popped the new clip on to the holder. Done!! Super easy. Wish I had done it 2 years ago when the thing first broke instead of trying to jury-rig it!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerKenneth from Amarillo TX
Leaky icemaker. Ice burgs in the bucket
Removed the old, installed the new. Very pleasant job when it is 106 outside. Now have Ice cubes with no Ice burgs. Thanks, Ken
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Socket set
CustomerMichael from Denver CO
Door wouldn't stay closed.
Removed old parts and replace parts ordered from you. Works great.
|